Your Web News in One Place

Help Webnuz

Referal links:

Sign up for GreenGeeks web hosting
April 22, 2023 03:32 pm GMT

Getting arty with a Pi

This week I built a BrachioGraph (as mentioned in my comment on "What was your win this week?"). It's a simple pen plotter, driven by a Raspberry Pi and some Python code.

A pen plotter with a logo drawn on paper

This is absolutely not my invention! I came across it in the most recent issue of The MagPi magazine, and immediately wanted to build one. The BrachioGraph was created and documented by Daniele Procida, all of the code is on GitHub, and it has been around for a number of years, since originally being introduced at a PyCon in 2019.

So... why build it? For fun; to learn; to put some hardware to use; and in preparation for a show that I'll be taking part in during May.

The basic things required are:

  • a single board computer, in this case I'm using a Pi Zero W v1.1 (I was able to replace the 4x Pi Zero W 1s in my Pi cluster-in-a-box with Pi Zero W 2s, so I had a few spare - I realise that these boards in general are not the easiest to get hold of right now, but in principle other SBCs with GPIO pins that support Python 3 should work as well)
  • 3 simple SG90 servos, I picked up a set of 5 cheaply via Amazon UK (affiliate link). I might update these to something slightly more resilient later, but these work fine.
  • some small sticks, in the US they might be popsicle sticks, here in the UK we call them ice lolly sticks, but I just got a bag of them as "craft sticks" in the local hobby store, something like 50 of them for 1, so I'm well-equipped to build other things later.

That is pretty much it! The website has some really great instructions describing how to connect it all up, but I have a few notes to throw in:

  • It has been a while since I played with a Pi Zero, and I wanted to get it set up without having to connect it to monitor, keyboard etc. I used the USB Ethernet Gadget method to install Raspberry Pi OS and then install the required packages without having to mess with any peripherals.

  • I wanted to make this somewhat reliable / reusable for events, so I've attached it to a sheet of mounting card.

  • I used my 3D printer (of which more, sometime soon) to quickly print a small plate for the Pi Zero to sit on. The one I picked is great, as the Pi just clips into it - I used some nylon screws to anchor it down.

A Pi Zero W in a simple white mounting plate

  • for the wiring, I spliced some cables together and used heat-shrink to cover at the joins (the motors need to share the 5V and GND pins from the Pi).

A bundle of coloured wires connected to the Pi Zero GPIO pins

  • I found that a ball pen or biro is not the best option for drawing, as it can take a bit of pressure to engage the ink. I'm fortunate to share a space with an crafting enthusiast with a full set of stationery, so I'm using a Micron pen at the moment (I also have the advantage of different colours and tip sizes to choose from, and these use archival ink so it is a very nice result).

Although I play with a lot of gadgets, the excitement of having this all work (click through for video, since Forem doesn't want to let me embed from PeerTube) once I'd set everything up was still hard to ignore!

I'll note that the instructions lead you through calibration and adjustment, which is very helpful - but it can also be a bit tedious! Doing the "full sweep" adjustment to find the correct pulse variances for each angle took a while, and the code to drive and capture those is unforgiving (i.e. it crashes and you lose everything) if you tap in an invalid value by mistake, or drive the servos past their limits - I had to start over several times...

There's a site called Brachio.me which is super useful for converting images to the format to drive the BrachioGraph, and which has an alternative version of a getting started tutorial. There are also useful community code examples, such as these utilities for handling SVGs and optimising plots.

What's next? I'm off to convert lots of images for our event... and also to think about some code improvements and a web UI for my own BrachioGraph!

Me, as a plotter-drawn image

Feel free to see what else we've been making in our studio, via Metapixl (it's a #Fediverse service, so you can follow @[email protected] from your favourite Fediverse app or account).


Original Link: https://dev.to/andypiper/getting-arty-with-a-pi-3dk9

Share this article:    Share on Facebook
View Full Article

Dev To

An online community for sharing and discovering great ideas, having debates, and making friends

More About this Source Visit Dev To