How to Create a Rubber Stamp Logo Mockup in Adobe Photoshop

In this tutorial I will guide you through the steps to create a photo-realistic hot stamp mockup with Adobe Photoshop. The process starts from scratch, so be sure to grab your camera (your smartphone will be fine), plug in your printer, and open your Photoshop (CS6 or higher), because this thrilling trip is about to start!

If you're looking for a professional logo mockup or don't have time to follow this, why not try this photo-realistic logo mockup pack available on Envato Elements.

Tutorial Assets

The following assets were used during the production of this tutorial:

• Real perspective image
• Rubber texture
• 30 Vintage Style Badges and Logos
• ChunkFive Font
• Bree Serif Font

1. How to Get the Right Perspective

Firstly, we need a real perspective that will be the base to build all the elements of the scene.

What we are going to do in this chapteris draw a solid object on a two-dimensional surface like the canvas of Photoshop, and then print and take a shot of it at different angles so as to give the right impression of the height, width, depth, and position of the object in relation to each other when viewed from a particular point.

I've already done this work for you, so you can just download it.

However, if you feel like it, you could create your own personal perspective. Just follow these steps:

Step 1

Create a1240x 1754 pxNew Documentin Photoshop.

Select the RectangleTool.

Move the cursor over the canvas and click. You’ll open a small dialog box that allows you to enter precise dimensions for your new shape. Type 350 x 350 px and click the OK button. The shape is created to the lower right of the point where you clicked.

Step 2

Locate the Properties panel. If you can't see the panel, open it by choosing Window > Properties.

Set theShape Fill Typeto Black, the Shape Stroke Fill to Transparent, and the position of the rectangle to 443 px for X and 700 px for Y axis:

Now, the black rectangle should be in the center of the canvas.

Step 3

Plug in your printer and print the document. Position your sheet on the floor, near a light source like a window or lamp.

Step 4

Grab your camera (your smartphone will be just fine) and get some shots of the black rectangle. With the camera in hand, try to get down and close to one of the rectangle's corner to get a more intense perspective. Take several pictures with different angles and positions, and choose one that suits you. You should get a perspective similar to this:

From now on, I will use my perspective for the tutorial, but the following steps are fine even if you have decided to use your personal perspective.

2. How to Add a Rubber Texture to the Scene

Step 1

Open the perspective image with Photoshop or, if you're using you own perspective created in the previous chapter, import it in a new 2500 x 1600 px document. If you're using your own perspective image, try to keep the proportions between the black rectangle and the white background similar to my image:

Locate the Layers panel. If you can't see the panel, open it by choosing Window > Layers.

Look at the "Background" layer. It could be locked (a small padlock appears close the right edge of the layer):

To unlock the layer, choose Layer > New > Layer from Background and press OK.

Rename the layer bydouble-clickingdirectly on the layer's name in theLayerspanel and changing it to"Perspective".

Step 2

Download the rubber textureand open it with Photoshop.

Select the texture by choosingSelect > Allor pressingCommand-A.Now copy the layer content by going toEdit > Copyor pressingCommand-C.

Go back to the previous document (the one with the perspective) by clicking on the proper tab.

Now paste the rubber texture just copied by choosingEdit > Pasteor pressingCommand-V.

Rename the layer bydouble-clickingdirectly on the layer's name in theLayerspanel and changing it to"Rubber Texture".

Close the rubber texture document. Don't savechanges to the document before closing.

Step 3

The rubber texture just imported is actually too large for our canvas, so chooseEdit> Free Transformor pressCommand-Tand drag a corner handle to resize the texture. PressShiftas you drag the corner handle to scale proportionally.

Move "Rubber Texture" layer behind "Perspective" by directly clicking and dragging the layer in the Layers panel:

3.How to Create the Smart Object

Step 1

In the Layers panel, select the "Perspective" layer and then choose the Rectangle Tool:

Move the cursor over the canvas and click. You’ll open a small dialog box that allows you to enter precise dimensions for your new shape. Type 1125x 1125 pxand click theOKbutton. The shape is created to the lower right of the point where you clicked.

Rename the layer bydouble-clickingdirectly on the layer's name in theLayerspanel and changing it to"Smart Object".

Step 2

With the layer "Smart Object" selected, choose, in the top menu, Layer > Smart Object > Convert to Smart Object.

Now you should have a square (no matter the color) over the perspective image:

What we're going to do now is distort the square (blue in my case) incorporated into the smart object to take the same shape of the black perspective image.

No worries! It'seasier than it looks. Just keep reading!

Step 3

Choose Edit > Transform > Scale.

If we look closely, a thin bounding box appears around the rectangle. We can also see a small square in the top center, bottom center, left center, and right center, as well as a square in each of the four corners. These little squares are called "handles", and we can transform whatever is inside the bounding box simply by dragging these handles around.

In this step, it's extremely important that we transform the square using only the handles at the corners of the bounding box.

Move the mouse cursor over the handle on the top-right corner, press and hold the Command button on your keyboard (the cursor will change to a small white arrow), and then click and drag the handle until you touch the top-right corner of the black perspective square with your mouse cursor:

Again, move the cursor over the handle on the top-left corner, press and hold theCommandbutton on your keyboard, and then click and drag the handle until you touch the top-left corner of the black square with your mouse cursor:

Repeat the same action with the corner at the bottom left:

Finally, do the same with the corner at the bottom right, and then press OK to confirm the changes:

Now you can remove the "Perspective" layer by selecting it in the Layers panel and choosing Layer > Delete > Layer.

Good work! Now the Smart Object is in the right perspective. Everything we put inside the Smart Object will take the angle of the blue square.

Now we're ready to replace the blue square inside the smart object with a badge or logo to customize our project. Let's go!

4. How to Prepare the Badge With Adobe Illustrator

As you have learned, we need a logo or badge to complete the scene. This badge will be a prominent element that later will be engraved in the rubber texture.

Fortunately,Envato Elements offers a wide range of high-quality badges and vector elements ready for use.Subscribe to unlock unlimited, high-quality badges, templates, photos and more for one monthly fee!

In this tutorial we'll use a badge that comes from a great collection of 30 Vintage Style Badges and Logos:

Step 1

Open the vector .ai file with Adobe Illustrator. While you open the file, a window may pop up alerting you that the document uses fonts that are currently not available on your computer. No worries about that—all the fonts are free for use, and you can find a text file inside the folder with all the references and links to download each font.

For the purpose of this tutorial, I replaced the two commercial fonts with the following free fonts:

• ChunkFive Font
  
• Bree Serif Font

Step 2

Once you're done with fonts, choose the Selection Tool(V).

Now select the "Seabreeze" badge (or whatever badge you like). Copy the badge by going toEdit > Copyor pressingCommand-C.

Create a new 350 x 350 px document in Adobe Illustrator. Now paste the badge you just copied by choosingEdit > Pasteor pressingCommand-V.

Step 3

With theSelection Tool(V), move the badge over the grey area, out of the white canvas.

Before importing the badge into our scene in Photoshop, we need to expand the appearance, convert all the text to vector shapes, and remove the white area revealed now that we've moved the badge onto the grey area.

If the badge is not selected, select it by clicking on it with theSelection Tool(V).

In the top menu, choose Object > Expand Appearance.

Again, choose Object > Expand. A dialog window will appear; select Object and Fill and press OK:

Step 4

Locate the Pathfinder panel. If you can't see the panel, open it by choosing Window > Pathfinder.

Choose Trim. The Trim button removes the part(s) of the objects that are overlapping or hidden.

Step 5

Now that the badge is 100% vector shapes, we can remove the white area.

Choose the Magic Wand Tool:

Move the cursor over a white area and click to select all the white areas of the badge:

If you need,magnify the canvas by using the Zoom Tool (Z).

Now that all the white areas of the badge are selected, remove them by choosing, in the top menu, Edit > Cut.

Now the badge is ready to be imported into the Photoshop scene!

5.How to Include the Badge in the Scene

Step 1

We're still in the Adobe Illustrator workspace. If the badge is not selected, select it by clicking on it with theSelection Tool(V). Copy the badge by going toEdit > Copyor pressingCommand-C.

Step 2

Go back to Photoshop, select theSmart Objectfrom theLayerspanel, and Double-clickon theSmart Objectsthumbnail.

When you edit aSmart Object, the source content is opened in a new window ofPhotoshop. Here, you can make any changes you like, and once you're satisfied, all you need to do is save the file and the Photoshop Smart Object will be updated when you return to it.

Deactivate the visibility for the blue square layer:

Now, paste the badge just copied by choosingEdit > Pasteor pressingCommand-V.

From the dialog box, choose Smart Object and press OK.

Locate the top options bar and set the badge's dimension to 562 x 562 px and its position to 440% for both Width and Heightfields. When you're done, press Enter on your keyboard:

Step 3

In the Layerspanel,double-clickthe layer outside the layer name or thumbnail to open the Layer Style panel. Add a newGradient Overlay, set the Blend Mode to Normaland the Opacity to 100%, and set the color of the overlay by clicking on the small color icon and typing the hex code #000000.

Step 4

Save the document by choosing File > Save or using the keyboard shortcut Command-S.

Go back to the main document and you'll notice that the smart object is now updated with the last changes. The badge, in fact, has taken the perspective of the smart object.

6. How to Engrave the Badge Into the Rubber

It's time to add some significant effects to the badge to give it a 3D feel, consistent with the scene.

Step 1

In theLayerspanel,double-clickthe layer outside the layer name or thumbnail to open theLayer Stylepanel.

Add a Bevel & Embossed style. In the Structure section, set the Style to Outer Bevel, Technique to Smooth, Depth to 100%, Direction Up, Size 4 px, and Soften 0 px.

In the Shading section, set the Angle to -153°, Altitude to 32°, Gloss Contour to Linear, Highlight Mode to Screen with white color #ffffff and Opacity to 0%, and finally Shadow Mode to Multiply with black color#000000 and Opacity to 50%.

Step 2

Add anInner Shadowstyle. In theStructuresection, set theBlend Modeto Multiplywith black color#000000andOpacityto75%, Angleto 45°,Distance 5 px, Choke 0%,andSize 3 px. Finally, in the Quality section, set the Contour to Linear and the Noise to 5%.

Step 3

Add anInner Glowstyle. In theStructuresection, set theBlend ModetoNormal, Opacity to 35%, Noise to 0% and black#000000for the color of the glow.

In the Elementssection, set the Technique to Softer, Source to Edge, Choke to 0%, and Size to 3 px.

Finally, in the Quality section, set the Contour to Linear, Range to 50%, and Jitter to 0%.

Step 4

Add aGradient Overlaystyle. Set the Blend Mode to Multiply, Opacity to 100%, Style Linear, Angle 12°, and Scale 100%.

Now click on the gradient rectangle to edit the gradient colors.

Set the two opacity stops to 100% and add 4 color stops. Set the color stops from left to right as follows:

• First color stop: color #040203, location 1%
• Second color stop: #26272a, location 36%
• Third color stop: #5b5e66, location 54%
• Fourth color stop: #e3e4e9, location 100%

Press OK to confirm the changes:

Step 5

Add aPattern Overlaystyle. Set the Blend Mode to Normal, Opacity to 100%, Scale to 100%, and click on the squared pattern icon:

A small window appears. Click on the tiny gear icon to open a flyout menu and choose Grayscale Paper. Click OK to replace the current patterns with the patterns from Grayscale Paper.

Choose Fiber 1 pattern from the list:

Step 6

Add anOuter Glowstyle. In the Structure section, set the Blend Mode to Screen, Opacity to 8%, Noise to 0%, and white#ffffff for the color of the glow.

In the Elements section, set the Technique to Softer, Spread to 0%, and Size to 10 px.

In the Quality section, set the Contour to Linear, Range to 100%, and Jitter to 0%.

Step 7

Add a Drop Shadow style. In the Structure section, set the Blend Mode to Normal with black #000000color, Opacity to 75%, Angle to -135°, Distance to 1 px, Spread to 0%, and Size to 1 px.

In the Quality section, set the Contour to Linear and Noise to 3%.

All the styles for the badge are done. Press OK to close the Layer Style panel and confirm the changes.

In the next step, I will show you how to add a smart filter with mask to the badge.

Step 8

Choose the Ellipse Tool and click somewhere on the canvas. Type1053 x 684 px. Now locate the Properties panel and set the position to 705 px for X and 494for Y axis.

Rename the layer bydouble-clickingdirectly on the layer's name in theLayerspanel and changing it to"Blur".

Right click on the "Blur" layer and choose Rasterize Layer.

Choose Filter > Blur > Gaussian Blur, set the radius to 45 px, and press OK.

Deactivate the "Blur" layer by clicking on the small eye icon.

Now press and hold the Command button on your keyboard and click on the layer thumbnail to make a selection of the ellipse.

Select the "Smart Object" layer, choose Filter > Blur > Gaussian Blur, and set the Radius to 4 px.

You'll notice that there's a small thumbnail near the smart filter you just added. Select the thumbnail by clicking on it:

Locate the Propertiespanel(Window > Properties) and click on Invert.

7.How to Add Some Highlights Effects to the Badge

Step 1

In theLayerspanel, select the "Smart Object" layer and choose Layer > New > Layer Via Copy to duplicate the layer.

Rename the layer bydouble-clickingdirectly on the layer's name in theLayerspanel and changing it to"Highlights".

Right click on the "Highlights" layer and choose Clear Layer Style from the flyout menu.

Step 2

Add aBevel & Embossedstyle. In theStructuresection, set theStyletoInner Bevel,TechniquetoSmooth,Depthto100%,Direction Up,Size 5 px, andSoften 0 px.

In theShadingsection, set theAngleto 20°,Altitudeto70°,Gloss ContourtoLinear,Highlight ModetoOverlaywith white color#ffffffandOpacityto75%, and finallyShadow ModetoMultiplywith black color#000000andOpacityto0%.

Step 3

Add anInner Shadowstyle. In theStructuresection, set theBlend ModetoMultiplywith black color#000000andOpacityto95%,Angleto90°,Distance 4 px,Choke 0%,andSize 2 px.

Finally, in theQualitysection, set theContourtoLinearand theNoiseto5%.

Step 4

Add aDrop Shadowstyle. In theStructuresection, set theBlend ModetoOverlaywith black #000000color,Opacityto75%,Angleto45°,Distanceto3 px,Spreadto0%, andSizeto4 px.

In theQualitysection, set theContourtoLinearandNoiseto7%.

8. How to Add a Glossy Finish to the Badge

Step 1

Create a new layer above the "Highlights" layer by choosing Layer > New > Layer, type the name "Gradient", and press OK.

Choose the Paint Bucket Tool and press D on your keyboard to set the foreground color to black.

Click somewhere on the canvas to fill the layer with black color. In the Layers panel set the Fill to 0%.

Step 2

In theLayerspanel,double-clickthe layer outside the layer name or thumbnail to open theLayer Stylepanel.

Add aGradient Overlaystyle. Set theBlend ModetoNormal,Opacityto100%,Style Linear,Angle 25°, andScale 80%.

Now click on the gradient rectangle to edit the gradient colors.

Set the two opacity stops to 100% and add 2 color stops. Set the color stops from left to right as follows:

• First color stop: color#000000, location50%
• Second color stop:#ffffff, location64%

PressOKto confirm the changes:

Step 3

In the Layers panel, move your cursor on the "Gradient" layer, right-click on it, and choose Convert to Smart Object from the flyout menu.

Do another right-click and choose Create Clipping Mask to reveal the badge and apply the effect.

In the top menu,Choose Filter > Filter Gallery.The Filter Gallery dialog box appears.

Click on Distort category folder.

The folder expands and displays the filters in that category. A thumbnail illustrating the filter’s effect accompanies each filter. Choose Glassand set the Distortion to 4, the Smoothness to 1, Texture to Frosted, and Scaling to 112%.

Finally, press OK to confirm and apply the effect.

9.How to Add an Overall Light Source to the Scene

In the Layers panel, select the "Rubber Texture" layer and thendouble-clickthe layer outside the layer name or thumbnail to open theLayer Stylepanel.

Add a Gradient Overlay style. Set theBlend ModetoOverlay,Opacityto 60%,Style Linear,Angle 40°, andScale 100%.

Now click on the gradient rectangle to edit the gradient colors.

Set the two opacity stops to100%and add2color stops. Set the color stops from left to right as follows:

• First color stop: color#000000, location1%
• Second color stop:#ffffff, location100%

PressOKto confirm the changes:

Congratulations, You're Done!

In this tutorial, you learned how to create a realistic Hot Rubber Stamp Mockup from scratch with Adobe Photoshop!

I hope that you've enjoyed my tutorial and learned something new.Please feel free to leave your comments, suggestions, and outcomes below.

Enjoy Photoshopping!