Your Web News in One Place

Sources Contact Advanced Search Tutorials

An Interest In:

Web News this Week

Some of Our Sources

View All Sources

Help Webnuz

Referal links:

March 8, 2013 12:30 pm PST

Create a Science Fiction Environment With Photoshop

Photoshop is a fantastic application because it allows you to create just about anything your imagination can dream up. In this tutorial, we will show you how to create a science fiction environment using digital painting and illustration techniques. While working on this piece, you will learn how to set up your color scheme, set your perspective, and even how to create a monster robot. Let’s get started.

Tutorial Assets

The following assets were used during the production of this tutorial.

Step 1

Let’s get started. Create a new document in Photoshop with following settings, then import the “Base photo” asset and place it as shown below. You can delete the Background layer. I called that first layer “Import”.

Step 2

Duplicate the “Import” layer, call the new one “Extend” and hide the “Import” one. We keep it at the bottom to be sure to have an untouched photo somewhere in our layers. Do a very thin selection, transform it, and fill the empty area as below.

Paint few strokes to break that stretching such as shown below.

Step 3

Create a new Group called "Persp". Add a new layer called "Point 1", and draw the perspective lines. Do the same on a different layer for the second point. Set the group’s Opacity to 40%. Feel free to hide and unhide this group whenever you need to check the perspective of your draw. Have a nice hierarchy in your layers, "as always."

Step 4

Above the “Extend” layer, create a new “Tweaks” one and add some light and smooth colors at the perspective point. Start to refine a bit the rough part of the sky.

On a new "BG Overlay" layer, start refining the background with very basic shapes just as below. Pick colors you find on the "Import" layer, at the same level in perspective. Tweak them a bit, as I did on the right side. Variations in colors bring a realistic impression, even small value changes.

Step 5

Now add a new “FG” group and draw the foreground buildings on a new “FG” layer with darker tones you directly find on the canvas. Keep in mind that the shapes must stay very sketchy at this step and don’t spend any time into small details. You can use custom brushes to have some nice effects very quickly, as speed painters do for example.

Step 6

On a new “BG Buildings” layer under the “BG” group, create some basic shapes of buildings. Refer as below (main color I used for this is #332f36). And this is it, we already have the environment setup for this tutorial. Let’s move on.

Step 7

Create a new Adjustment Curves Layer above the “BG Overlay” with following settings. We don’t want that Adjustment Layer to change the bottom of the sky. Therefore, with the grade tool, create a black/white ramp in the Layer Mask of the “Curves 1″ layer such as below.

Then, by pressing Command/Ctrl+L (Image > Adjustments > Levels…) on the “BG Buildings” layer, do some changes as below to match the new sky.

The result of this step is a background more detached from the foreground. This is very important, since we don’t want the viewers to be distracted due to the amount of information we will try drawing.

Step 8

Now you can start refining a bit the edges and adding details. Don’t be too precise, refer to below.

I darkened and changed the colors of those areas from the foreground.

Here is our result.

Step 9

On a new "Battle scene" group, create two layers called "Robot" and "Robot lasers". Start drawing a robot, which is going to be the "bad guy" of this illustration. I place it over one perspective point. This is an easy way to lead the viewers’ eyes to this Robot.

Step 10

Let’s refine part of the "BG Buildings" we created before. Hide the "Battle scene" group. Basically, just paint some more precise and defined shapes with hard brushes and/or custom brushes.

Do the same with “FG” and refer as shown below. This step is a bit long, but necessary.

And here is the result of this refining step.

Step 11

Refine the Robot now.

Quickly create some soldiers and the lights of the guns on 2 new layers.

Step 12

Add more light to the ground and refine the shadows in the “FG” layer.

Do some refining on the buildings as well, as you can see below.

Change a bit the brightness (Image > Adjustments > Brightness/Contrast) of selected parts of the “BG Buildings” layer, to add some more depth in the draw.

Import the “Soil” from the asset and transform it to match the perspective and the ground. Set is as a Clipping Mask to the “FG” Layer, set his Blending Mode to “Overlay”, and erase the parts that aren’t over the ground in a Layer Mask.

Here is the result of this step.

Step 13

Now it is time to add some fine details. Let’s start with the Robot.

Add more Contrast (100) and Brightness (10) on the “BG Buildings” layer (Image > Adjustments > Brightness/Contrast…), remove some saturation (set Saturation to -20 in Image > Adjustments > Hue/Saturation) and refine even more, such as shown below. Don’t worry about hidden parts.

And again, refine the foreground. The whole process is about refining everything step by step. This is a bit dangerous since we tend to focus refining only on one main point. A good tip to avoid this is to constantly flip the canvas horizontally. But trust me, I can’t even count the number of times that I failed because I started focusing only on one point or side. I wasn’t anymore able to tell what was wrong with my illustrations in every case, so I left them.

Now, between the “FG” and the soil layer, as a clipping mask, add a new “Building Noise” layer. With black and white as selected color, create clouds (Filter > Render > Clouds). Set this layer’s Opacity to 30% and his blending mode to Overlay. Move it a bit at the top of the canvas to have it active only for the building part of the “FG” layer.

Create a new layer above the soil one, but without being set as Clipping Mask. Rename it to “Fog”. Select such a color : #644e60, and with a soft brush and a very low opacity, create a fog overlay effect, such as shown below.

Step 14

Time to do the first Color Balance. Create that new Adjustment Layer and set as below.

By painting in the Layer Mask, hide the background parts of that Color Balance Adjustment Layer. It doesn’t need to be very precise, refer as below, as always.

Create a new "Lights" layer above the "Color Balance 1" one, fill it with black, set his blending mode to "Linear Dodge (Add), and with a color at full saturation and brightness set at 50% (for example #007d8c), with a soft low opacity brush set to Screen, create those beautiful light effects.

Refine the “Robot Laser” layer, add a small explosion effect with a grunge brush. Add some small pieces being ejected away from the explosion on a different layer I called “Explosion”. Resize the soldiers and tweak them as below, since they were too big for the general scale.

Here is the result of this step.

Step 15

Above the “Curves 1″ layer of the “BG” group, add a new Level Adjustment Layer. Set it as below to darken the sky.

Now with the Brightness/Contrast tool, change the Brightness of the “BG Buildings” layer to -67 to darken them as well.

Do the same to the “FG” layer, with Brightness set to -40 and Contrast to 60. We really need heavy contrast on the foreground. Then, on a new “Shadows” layer above the “Lights” one, with a black color, paint some shadows. You have a preview of how I painted them below, in red. Use the Eraser tool with a soft brush if needed, to create some nice shadows. Then, set the blending mode to “Multiply”, and the Opacity to 50%.

On a new "Final FX" group right below the "Persp" one, create a new "SciFi Lightning" layer that is similar to the "Lights" one. Create a global sci-fi cyan lightning. Here is a preview about how your layer must look like if you set his blending mode to normal. Once you have the same, reset is to Linear Dodge and set his Opacity to about 60%.

It changes a lot the mood of the draw, and bring it to something more cold and futuristic.

Here is a small overview of our layers.

Step 16

Let’s refine the “BG Buildings” for the last time. I added some lights on a separated layer, “Final lights”.

Step 17

Let’s refine the "FG" for the last time. Adding such small details as wires, antennas, and barriers comes only at the end of the process. It adds lots of realism and details, but if you focus on adding this kind of stuff when the draw is still not well defined, you’ll have some serious problems with the illustration looking good. I simplified a lot the ground as well, since we’ll redraw the shadows nicely. You probably noticed that we had a double shadow effect until now. I disabled the layers above the "FG" one and his clipping mask layers, to help you compare what I have without those overlay layers and what you should have.

Right above the “FG” layer (and as clipping mask of course), create a new "Brushes" layer. Then draw some small effects with some specials “speed painting” brushes, to add fine details.

I reactivated the layers of the “FG” group. Then, above the “Color Balance 1″, I created a new “Ground Noise” layer, blending mode set to Overlay and Opacity to 65%. Then, with a grunge brush, I added those kind of nice variations to the ground.

Here is the picture with the redefined “Lights” layer.

…And with the redefined “Shadows” one.

Here is the look of this step. The draw starts to be really similar to the final one.

Step 18

At the top of the “FG” group, create a new “FGG Add” one and draw those 2 structures. I had the feeling it was needed to have some kind of very near structures there.

Then, refine few layers. Here, “Soldiers”.

“Soldiers lasers”, “Robot” and “Robot laser”. We’ll create the explosion in the next step.

Step 19

At the top of the “Battle scene” group, create a new one called “Explosion”. Then, with a grunge brush, create such an explosion. The idea is to start from the exterior with some dark very saturated reds, and to go inside step by step with colors going to something like very light low saturated yellows, at the center of the explosion.

On a new “EXP Details 1″, draw some small mini-explosions going outside of the main one.

On a new “EXP Details 2″, draw some metal pieces as shown below.

Then, by using the same process you did to create the lightning effects, add some glow to the explosion on a new layer, “EXP glow”.

Here is the look.

Step 20

Let’s move to the “Final FX” Group. Create a new Level Adjustment Layer, set it as below, and add some black at the background on the layer mask. The idea is to add some more contrast in the foreground.

Create another Level Adjustment Layer with following settings and layer mask. Goal here is to create a vignetting effect, and to darken few parts of the foreground.

Step 21

Now create a new “Hard Edges” Layer, apply an image on it (Image > Apply Image, then press OK without changing the settings). Add a Filter > Sharpen > Sharpen More. Create a layer mask, and draw in black the background: we don’t want it to be sharpened. Refer as below.

With black and white as selected colors, create clouds (Filter > Render > Clouds) on a new and last “Global noise” layer.. Then, add some noise to those clouds. (Filter > Noise > Add Noise). Set it as below. Change the blending mode to Multiply, and the Opacity to 4%. And here we are, that’s our final draw..

Details

Zoom in and take a look at some of the details.

Final Image

Original Link: http://feedproxy.google.com/~r/psdtuts/~3/UTlLWyEpEoo/

Share this article:

Share on Facebook

View Full Article

TutsPlus - Design

TutsPlus+ is a blog/Photoshop site made to house and showcase some of the best Photoshop tutorials around.

More About this Source Visit TutsPlus - Design