Unintentionally funny video instructions for factory resetting GE light bulbs

Use the first reset sequence if:

Your bulbs are running on firmware version 2.8 or later (you can find your bulb firmware version by tapping on the device in your C by GE app).

We recommend counting with Mississippi (1 Mississippi, 2 Mississippi, 3 Mississippi, etc.).

Start with your bulb off for at least 5 seconds.1. Turn on for 8 seconds2. Turn off for 2 seconds3. Turn on for 8 seconds4. Turn off for 2 seconds5. Turn on for 8 seconds6. Turn off for 2 seconds7. Turn on for 8 seconds8. Turn off for 2 seconds9. Turn on for 8 seconds10. Turn off for 2 seconds11. Turn onBulb will flash on and off 3 times if it has been successfully reset.

If the factory reset above was unsuccessful, you might have an older version of the C by GE bulb. Please follow the instructions below to reset.

Bulb Reset Sequence for firmware version 2.7 or earlier:We recommend counting with Mississippi (1 Mississippi, 2 Mississippi, 3 Mississippi, etc.).

Start with your bulb off for at least 5 seconds.1. Turn on for 8 seconds2. Turn off for 2 seconds3. Turn on for 2 seconds4. Power off for 2 seconds5. Turn on for 2 seconds6. Power off for 2 seconds7. Turn on for 2 seconds8. Power off for 2 seconds9. Turn on for 8 seconds10. Power off for 2 seconds11. Read the rest