An Interest In:
Web News this Week
- March 28, 2024
- March 27, 2024
- March 26, 2024
- March 25, 2024
- March 24, 2024
- March 23, 2024
- March 22, 2024
December 16, 2011 12:42 am EDT
The result of their labor is a computed tomography image spectrometer (CTIS), which takes hyperspectral images by splitting light into spectral bands with a diffuser and recording them using a Canon EOS 5D Mark I in HDR mode. As constructed, the prototype takes a spectral resolution of up to 4.89nm in a 120 x 120 pixel area, though at a longer exposure time than dedicated devices. Having proven their concept, the plan is to build another lens extension using custom tubes and lenses that'll both reduce weight and increase the aperture to shorten the exposure time -- all for less than a grand. You can see both the camera's construction and some sample images in the gallery below, plus you can dig deep into the nitty gritty behind this bit of imaging black magic at the source link.
Original Link: http://www.engadget.com/2011/12/15/researchers-turn-a-dslr-into-hyperspectral-camera-using-pvc-and/
Researchers turn a DSLR into hyperspectral camera using PVC and duct tape, MacGyver green with envy
Hyperspectral imaging is a method that captures a far greater amount of the electromagnetic spectrum than a regular photograph. This makes it ideal for a variety of uses, from night vision to identifying mineral deposits from afar, but the problem is that hyperspectral sensors don't come cheap. However, some intrepid imaging scientists have come up with a way to turn your DSLR into a hyperspectral camera using stock SLR glass, a gel diffraction filter, PVC pipe, duct tape, some serious ingenuity and plenty of elbow grease. Thusly did they build a (relatively) cheap-as-chips imaging spectrometer that can deliver spectral resolution equal to that of commercial solutions at a far lower cost.The result of their labor is a computed tomography image spectrometer (CTIS), which takes hyperspectral images by splitting light into spectral bands with a diffuser and recording them using a Canon EOS 5D Mark I in HDR mode. As constructed, the prototype takes a spectral resolution of up to 4.89nm in a 120 x 120 pixel area, though at a longer exposure time than dedicated devices. Having proven their concept, the plan is to build another lens extension using custom tubes and lenses that'll both reduce weight and increase the aperture to shorten the exposure time -- all for less than a grand. You can see both the camera's construction and some sample images in the gallery below, plus you can dig deep into the nitty gritty behind this bit of imaging black magic at the source link.
Researchers turn a DSLR into hyperspectral camera using PVC and duct tape, MacGyver green with envy originally appeared on Engadget on Thu, 15 Dec 2011 19:42:00 EDT. Please see our terms for use of feeds.
Permalink | ||CommentsOriginal Link: http://www.engadget.com/2011/12/15/researchers-turn-a-dslr-into-hyperspectral-camera-using-pvc-and/
Share this article:
Tweet
View Full Article
Engadget
Engadget is a web magazine with obsessive daily coverage of everything new in gadgets and consumer electronics. Engadget was launched in March of 2004 in partnership with the Weblogs, Inc. Network (WIMore About this Source Visit Engadget